How To Remove Towel Bar With Slot?

How To Remove Towel Bar With Slot
Download Article Download Article So you want to update or get rid of the towel bar in your bathroom, but how can you get the old one off of the wall? Even if there aren’t any visible screws on the towel bar, you can easily remove it from your wall with tools that you probably have at home already. Keep reading to find out everything you need to know about uninstalling the most common types of towel racks!

  1. 1 Loosen the set screws on the bottoms of the towel bar posts. Look for the screw hole on the underside of the post near where it connects to the wall. Use an allen wrench for a hew screw or a Philips-head screwdriver if the towel bar uses standard screws. Turn the screws counter-clockwise until they’re loose and the towel bar easily wiggles on the brackets.
    • If you don’t see screw holes or screws on the posts, try lightly pulling the bases of the posts away from the wall. They may slide up on the post and expose hidden screws. If not, then the towel bar is held on with adhesives,
    • If there is small slot in the bottoms of the posts but can’t see a screw inside, then the towel bar has tabs that you need to press down to remove it.
  2. 2 Lift the towel bar and posts off of the wall brackets. Once you loosen the set screws, the towel bar will easily come off of the wall. Hold onto the posts to support the bar’s weight and gently lift it up and away from your wall.
    • If the towel bar still sticks to the wall, then loosen the screws more since they’re still catching on the wall brackets.

    Advertisement

  3. 3 Unscrew the brackets hanging on the wall. You’ll either have small metal brackets or larger cylindrical brackets still attached to your wall. Use a screwdriver to turn the screws counter-clockwise to loosen and remove them completely from the wall.
    • Some brackets are screwed directly into your wall while others may screw into a wall anchor in your drywall. You can pull out the wall anchor carefully with a pair of needlenose pliers.
  4. Advertisement

  1. 1 Push a flat-head screwdriver into the release slot on one of the posts. Look for a small slot on the bottom of the post near where it connects to the wall. Gently poke the end of the flat-head screwdriver into the slot as far as you can and hold it in place to keep the tab released.
    • Some towel bars without set screws have a specific way to adjust and remove by twisting the side mounts horizontally away from the bar.
  2. 2 Lift the post and bar off of the bracket. Keep your screwdriver pressed in the slot so the tab doesn’t relatch to the bracket. Slowly lift the bottom of the post up and away from the wall until it comes off of the bracket. The bar should easily pull out from the end of the post still attached to the wall.
    • If the bar doesn’t come off easily, ask a helper to release the tab on the second post so you can remove both posts and the bar at the same time.
    • Make sure the bar is pushed all the way to the opposite end from the side you are trying to remove.
  3. 3 Remove the second post. Once you get the first post and bar off, take the second one off the same way. Push your screwdriver into the slot until you feel it press down on the release tab, and then carefully pull it away from your wall.
  4. 4 Take the wall brackets out with a screwdriver. Your towel bar clipped into brackets attached to the wall, so turn the screws counter-clockwise with your screwdriver to loosen them.
    • If you plan on installing a new towel bar, then you may be able to reuse the brackets.
  5. Advertisement

  1. 1 Put painter’s tape on the wall surrounding the posts. Since it takes a little more work to fully remove adhesive towel bars, there’s a slight chance you could ding or dent the surrounding wall. Cut off strips of painter’s tape and place them around the base of each post.
  2. 2 Try prying the posts off with a putty knife and hammer. Put on a pair of safety glasses to protect yourself from any pieces that could break off. Position the blade of the putty knife flat between the towel bar’s post and the wall. Gently tap the end of the knife with a hammer to cut through the adhesive.
    • Adhesive used to secure towel bars is heavy-duty, so there’s a chance that it could damage the wall underneath when you remove it. You’ll reduce the risk of damage as long as you work slowly and carefully.
  3. 3 Use an oscillating multi-tool to cut through stubborn adhesive. An oscillating multi-tool has a sharp blade that quickly rotates to slice through the wall adhesive. Put on a pair of safety glasses and a dust mask, and place the blade flush against the wall near the base of the wall post. Turn the tool on and slowly guide it between the wall and towel bar post to cut through it. Once you remove the first post, then take out the second post the same way.
  4. Advertisement

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

If there’s any damage to your wall from removing the towel bar, patch the holes to repair them. As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

Advertisement Thanks to all authors for creating a page that has been read 1,959 times. If you buy through links on our site, we may earn a commission.

How do you remove a towel bar without a screw?

Download Article Download Article So you want to update or get rid of the towel bar in your bathroom, but how can you get the old one off of the wall? Even if there aren’t any visible screws on the towel bar, you can easily remove it from your wall with tools that you probably have at home already. Keep reading to find out everything you need to know about uninstalling the most common types of towel racks!

  1. 1 Loosen the set screws on the bottoms of the towel bar posts. Look for the screw hole on the underside of the post near where it connects to the wall. Use an allen wrench for a hew screw or a Philips-head screwdriver if the towel bar uses standard screws. Turn the screws counter-clockwise until they’re loose and the towel bar easily wiggles on the brackets.
    • If you don’t see screw holes or screws on the posts, try lightly pulling the bases of the posts away from the wall. They may slide up on the post and expose hidden screws. If not, then the towel bar is held on with adhesives,
    • If there is small slot in the bottoms of the posts but can’t see a screw inside, then the towel bar has tabs that you need to press down to remove it.
  2. 2 Lift the towel bar and posts off of the wall brackets. Once you loosen the set screws, the towel bar will easily come off of the wall. Hold onto the posts to support the bar’s weight and gently lift it up and away from your wall.
    • If the towel bar still sticks to the wall, then loosen the screws more since they’re still catching on the wall brackets.

    Advertisement

  3. 3 Unscrew the brackets hanging on the wall. You’ll either have small metal brackets or larger cylindrical brackets still attached to your wall. Use a screwdriver to turn the screws counter-clockwise to loosen and remove them completely from the wall.
    • Some brackets are screwed directly into your wall while others may screw into a wall anchor in your drywall. You can pull out the wall anchor carefully with a pair of needlenose pliers.
  4. Advertisement

  1. 1 Push a flat-head screwdriver into the release slot on one of the posts. Look for a small slot on the bottom of the post near where it connects to the wall. Gently poke the end of the flat-head screwdriver into the slot as far as you can and hold it in place to keep the tab released.
    • Some towel bars without set screws have a specific way to adjust and remove by twisting the side mounts horizontally away from the bar.
  2. 2 Lift the post and bar off of the bracket. Keep your screwdriver pressed in the slot so the tab doesn’t relatch to the bracket. Slowly lift the bottom of the post up and away from the wall until it comes off of the bracket. The bar should easily pull out from the end of the post still attached to the wall.
    • If the bar doesn’t come off easily, ask a helper to release the tab on the second post so you can remove both posts and the bar at the same time.
    • Make sure the bar is pushed all the way to the opposite end from the side you are trying to remove.
  3. 3 Remove the second post. Once you get the first post and bar off, take the second one off the same way. Push your screwdriver into the slot until you feel it press down on the release tab, and then carefully pull it away from your wall.
  4. 4 Take the wall brackets out with a screwdriver. Your towel bar clipped into brackets attached to the wall, so turn the screws counter-clockwise with your screwdriver to loosen them.
    • If you plan on installing a new towel bar, then you may be able to reuse the brackets.
  5. Advertisement

  1. 1 Put painter’s tape on the wall surrounding the posts. Since it takes a little more work to fully remove adhesive towel bars, there’s a slight chance you could ding or dent the surrounding wall. Cut off strips of painter’s tape and place them around the base of each post.
  2. 2 Try prying the posts off with a putty knife and hammer. Put on a pair of safety glasses to protect yourself from any pieces that could break off. Position the blade of the putty knife flat between the towel bar’s post and the wall. Gently tap the end of the knife with a hammer to cut through the adhesive.
    • Adhesive used to secure towel bars is heavy-duty, so there’s a chance that it could damage the wall underneath when you remove it. You’ll reduce the risk of damage as long as you work slowly and carefully.
  3. 3 Use an oscillating multi-tool to cut through stubborn adhesive. An oscillating multi-tool has a sharp blade that quickly rotates to slice through the wall adhesive. Put on a pair of safety glasses and a dust mask, and place the blade flush against the wall near the base of the wall post. Turn the tool on and slowly guide it between the wall and towel bar post to cut through it. Once you remove the first post, then take out the second post the same way.
  4. Advertisement

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

If there’s any damage to your wall from removing the towel bar, patch the holes to repair them. As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

Advertisement Thanks to all authors for creating a page that has been read 1,959 times. If you buy through links on our site, we may earn a commission.

Where is the set screw on a towel bar?

How to Remove a Towel Bar With a Set Screw – Many towel bars feature a small set screw that holds the towel bar to a bracket on the wall. Remember, the goal of the towel bar manufacturer is to keep the set screw hidden from view, so just because you don’t immediately see a set screw, doesn’t mean it isn’t there.

  1. What causes a towel bar to come off the wall?

    How Often to Replace a Towel Bar – There are no common reasons why a towel bar would need to be replaced beyond them simply breaking. In fact, the main reason people think a towel bar should be replaced isn’t due to the towel bar itself at all, but rather the brackets becoming loose from the wall.

    How do you remove the bottom of a post and bar?

    Download Article Download Article So you want to update or get rid of the towel bar in your bathroom, but how can you get the old one off of the wall? Even if there aren’t any visible screws on the towel bar, you can easily remove it from your wall with tools that you probably have at home already. Keep reading to find out everything you need to know about uninstalling the most common types of towel racks!

    1. 1 Loosen the set screws on the bottoms of the towel bar posts. Look for the screw hole on the underside of the post near where it connects to the wall. Use an allen wrench for a hew screw or a Philips-head screwdriver if the towel bar uses standard screws. Turn the screws counter-clockwise until they’re loose and the towel bar easily wiggles on the brackets.
      • If you don’t see screw holes or screws on the posts, try lightly pulling the bases of the posts away from the wall. They may slide up on the post and expose hidden screws. If not, then the towel bar is held on with adhesives,
      • If there is small slot in the bottoms of the posts but can’t see a screw inside, then the towel bar has tabs that you need to press down to remove it.
    2. 2 Lift the towel bar and posts off of the wall brackets. Once you loosen the set screws, the towel bar will easily come off of the wall. Hold onto the posts to support the bar’s weight and gently lift it up and away from your wall.
      • If the towel bar still sticks to the wall, then loosen the screws more since they’re still catching on the wall brackets.

      Advertisement

    3. 3 Unscrew the brackets hanging on the wall. You’ll either have small metal brackets or larger cylindrical brackets still attached to your wall. Use a screwdriver to turn the screws counter-clockwise to loosen and remove them completely from the wall.
      • Some brackets are screwed directly into your wall while others may screw into a wall anchor in your drywall. You can pull out the wall anchor carefully with a pair of needlenose pliers.
    4. Advertisement

    1. 1 Push a flat-head screwdriver into the release slot on one of the posts. Look for a small slot on the bottom of the post near where it connects to the wall. Gently poke the end of the flat-head screwdriver into the slot as far as you can and hold it in place to keep the tab released.
      • Some towel bars without set screws have a specific way to adjust and remove by twisting the side mounts horizontally away from the bar.
    2. 2 Lift the post and bar off of the bracket. Keep your screwdriver pressed in the slot so the tab doesn’t relatch to the bracket. Slowly lift the bottom of the post up and away from the wall until it comes off of the bracket. The bar should easily pull out from the end of the post still attached to the wall.
      • If the bar doesn’t come off easily, ask a helper to release the tab on the second post so you can remove both posts and the bar at the same time.
      • Make sure the bar is pushed all the way to the opposite end from the side you are trying to remove.
    3. 3 Remove the second post. Once you get the first post and bar off, take the second one off the same way. Push your screwdriver into the slot until you feel it press down on the release tab, and then carefully pull it away from your wall.
    4. 4 Take the wall brackets out with a screwdriver. Your towel bar clipped into brackets attached to the wall, so turn the screws counter-clockwise with your screwdriver to loosen them.
      • If you plan on installing a new towel bar, then you may be able to reuse the brackets.
    5. Advertisement

    1. 1 Put painter’s tape on the wall surrounding the posts. Since it takes a little more work to fully remove adhesive towel bars, there’s a slight chance you could ding or dent the surrounding wall. Cut off strips of painter’s tape and place them around the base of each post.
    2. 2 Try prying the posts off with a putty knife and hammer. Put on a pair of safety glasses to protect yourself from any pieces that could break off. Position the blade of the putty knife flat between the towel bar’s post and the wall. Gently tap the end of the knife with a hammer to cut through the adhesive.
      • Adhesive used to secure towel bars is heavy-duty, so there’s a chance that it could damage the wall underneath when you remove it. You’ll reduce the risk of damage as long as you work slowly and carefully.
    3. 3 Use an oscillating multi-tool to cut through stubborn adhesive. An oscillating multi-tool has a sharp blade that quickly rotates to slice through the wall adhesive. Put on a pair of safety glasses and a dust mask, and place the blade flush against the wall near the base of the wall post. Turn the tool on and slowly guide it between the wall and towel bar post to cut through it. Once you remove the first post, then take out the second post the same way.
    4. Advertisement

    Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

    If there’s any damage to your wall from removing the towel bar, patch the holes to repair them. As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

    Advertisement Thanks to all authors for creating a page that has been read 1,959 times. If you buy through links on our site, we may earn a commission.